Computer
Inhaltsverzeichnis |
Neuer Computer 09/2009
Typ: Tux@Home Linux Desktop von ixsoft mit leicht angepassten Komponenten.
Hardware
- Gehäuse: JCP Minitower 16, JCP MN 16, GEH-JCP-MN-16.B
- CPU: AMD Athlon II X2 250, OPN: ADX2500CGQBOX, 3,0 GHz/65 W, 45 nm K10 (Regor)
- Alternativen: Athlon II X4 630, Athlon II X2 240e (?), siehe Heise, siehe c't 21/09 S.74 und c't 23/09 S.66 und LU 11/09 S.84, siehe CPU-Nachschub von AMD und AMD beschleunigt Prozessoren der Athlon-II-Familie ein wenig (Heise), Sechskern-Prozessor Phenom II X6 siehe c't 11/10 S.138 und LU 07/10 S.72, AMD beschleunigt Athlons und Phenoms
- Netzteil: XILENCE XP420, 420 Watt, passiv-PFC, 120mm Lüfter temperaturgeregelt 1200rpm • +3,3 V: 28A • +5,0 V: 27A • +12,0 V1: 13A • +12,0 V2: 14A • -12 V: 0,8A • +5Vsb: 2A
- Motherboard: Asus M4A785D-M PRO, akt. BIOS 0506, AMD785G Chipsatz (SB710), CPU Support,BIOS
- Audio (auf Motherboard): VIA VT1708S (Intel HDA; SBx00 Azalia)
- Power-Connectoren frei: 2xIDE, 1xFloppy, 2xSATA-II
- SATA-II-Ports: 5x (2 belegt), 1x eSATA
- Grafik: On Board, ATI Radeon HD 4200 (RV620)
- LAN: On Board Realtek PCIe GBit-Ethernet
- RAM: 2x2GB, PC2-6400 CL5 (DDR2-800), PATRIOT PSD22G8002, PS000500, 2 Steckplätze frei
- Festplatte: Samsung F1 HD103UJ
- DVD-Brenner: Samsung SH-S223B ,Super Writemaster, SpeedPlus, TSSTcorp CDDVDW
- Schreibgeschwindigkeit (max.): DVD+R DL (16X), DVD+RW (8X), DVD-R(22X), DVD+R(22X), DVD-RW (6X), DVD-RW(DL)(2X), CD-R (48X), CD-RW (32X), DVD-R DL (12X), DVD-RAM(12X)
BIOS
Upgrade
BIOS-Updates über
BIOS -> Tools -> EZFlash
Downdate
Ein BIOS-Downgrade funktioniert nicht mit EZFlash, sondern nur mit dem DOS-Tool AFUDOS (AFUDOS229ES.zip), welches zusammen mit der BIOS-Datei (beides unzipped) auf einen bootbaren USB-Stick kopiert werden muss. Mit dem USB-Stick dann den PC booten und das (ältere) BIOS installieren mittels
AFUDOS /i506.ROM
wobei 506.ROM der Name der BIOS-Datei ist.
Siehe auch:
- A Solution to Downgrade BIOS
- How to Downgrade Asus BIOS
- HP USB-Format Tool, bootbar z.B. mit verlinkten Windows 98 System Files
Probleme beim BIOS-Upgrade auf 0806
Nach Installation von BIOS 0806 über das vorhandene BIOS 0506 bootete Linux nicht mehr, sondern blieb direkt beim Starten des Kernels hängen. Der Asus-Support hat mir daraufhin ein CMOS-Reset nahegelegt, was das Problem dann auch behoben hat.
CMOS-Reset:
- Stromversorgung vom Rechner trennen
- Knopfbatterie heraus nehmen
- Jumper CLRTC umstecken und 10-15 min warten
- Jumper CLRTC wieder umstecken in den Ausgangszustand
- Knopfbatterie wieder einsetzen
- Stromstecker wieder anschließen und Rechner neu starten
- Im BIOS mit F5 die Standartwerte laden und speichern Sie mit F10.
Partitionierung
Außer /boot kann alles per LVM verwaltet werden. Beispiel für openSUSE 11.2:
# fdisk -l /dev/sda Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000e026b Device Boot Start End Blocks Id System /dev/sda1 * 1 26 208813+ 83 Linux /dev/sda2 27 117514 943722360 8e Linux LVM # df Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/vgsystem-root 103212320 21860608 76108832 23% / udev 1898960 388 1898572 1% /dev /dev/sda1 202219 25422 166357 14% /boot /dev/mapper/vgsystem-data 619273992 79821616 507995096 14% /data # mount /dev/mapper/vgsystem-root on / type ext4 (rw,acl,user_xattr) /dev/sda1 on /boot type ext4 (rw,acl,user_xattr) /dev/mapper/vgsystem-data on /data type ext4 (rw,acl,user_xattr) # cat /etc/fstab /dev/mapper/cr_crypt /crypt ext4 acl,user_xattr,noauto 0 0 /dev/vgsystem/swap swap swap defaults 0 0 /dev/vgsystem/root / ext4 acl,user_xattr 1 1 /dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJDWS725606-part1 /boot ext4 acl,user_xattr 1 2 /dev/vgsystem/data /data ext4 acl,user_xattr 1 2 # vgdisplay --- Volume group --- VG Name vgsystem System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 5 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 3 Max PV 0 Cur PV 1 Act PV 1 VG Size 900.00 GB PE Size 4.00 MB Total PE 230400 Alloc PE / Size 205824 / 804.00 GB Free PE / Size 24576 / 96.00 GB VG UUID YuprZU-eCXy-VH6Y-KhNp-LNLd-IcWx-xc3ZWW # pvdisplay --- Physical volume --- PV Name /dev/sda2 VG Name vgsystem PV Size 900.00 GB / not usable 3.87 MB Allocatable yes PE Size (KByte) 4096 Total PE 230400 Free PE 24576 Allocated PE 205824 PV UUID eZiB9e-MbE4-HYyo-wctE-7epY-te8Q-8EuO0y # lvdisplay --- Logical volume --- LV Name /dev/vgsystem/crypt VG Name vgsystem LV UUID 2coWtm-zIP7-1uTR-njUh-XIeO-FJD8-vygRvI LV Write Access read/write LV Status available # open 0 LV Size 100.00 GB Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/vgsystem/data VG Name vgsystem LV UUID aBldt3-zmUB-gcyd-QnZf-GoCa-mFZU-Mec1iI LV Write Access read/write LV Status available # open 1 LV Size 600.00 GB Current LE 153600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/vgsystem/root VG Name vgsystem LV UUID tBzuSZ-Uc90-W2h9-Y0lN-ZVp8-UZCc-LJdWfN LV Write Access read/write LV Status available # open 1 LV Size 100.00 GB Current LE 25600 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/vgsystem/swap VG Name vgsystem LV UUID YYBSrO-Dhqc-eg5p-EhSw-5hFs-v1iF-cDgPXP LV Write Access read/write LV Status available # open 2 LV Size 4.00 GB Current LE 1024 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3
Manuelle Installations- und Konfigurationsschritte
Manuelle Konfiguration und Installation nach einer Neuinstallation:
- Dovecot
- Mail, kontact
- Amarok
- Digikam
- kmymoney
- Calibre
- DVD/CSS
- ~/bin dirs
- $HOME
- .alias
- .ssh
- VirtualBox (Paket kernel-desktop-devel)
- GnuPG
- SMIME (Browser, Email)
- Firefox (Bookmarks, Plugins, Konfig)
- Konqueror (Bookmarks, SSL-Certs)
- Duden OfficeBib
- Pigdin
- Google Earth
- VLC
- zsafe
- Skype
- kaffeine (DVB-T)
- OpenVPN
- rsnapshot
- crontabs
- NTP
- NAS
- /etc/hosts
- /etc/passwd
- /etc/X11 bzw. Xorg (DRI), radeon
- Schriften: Kantenglättung aktivieren (anti-aliasing, Sub-Pixel Hinting) und Deja-Fonts, siehe [1] und [2]
Audio
Probleme mit Audio unter KDE4. Ton erst nach Restart von alsa, nachdem KDE gestartet ist, dann jedoch nur OSS. Alle anderen Audio-Applikationen funktionieren jedoch ohne Alsa-Restart. -> Phonon scheint das Problem zu sein.
- Auch mit Pulseaudio-Server keine Abhilfe.
- Option probiert /etc/modprobe.d/50-sound.conf:
options snd-hda-intel model=asus
Alter Computer
- Netzteil: Enermax EG365P-VE
Shops
- http://www.ixsoft.de/cgi-bin/web_store.cgi?cart_id=3481255_15541&page=Catalogs/de/hardware-catalog.html
- http://www.linux-discount.de/hardware/desktops/
- http://www.linux-onlineshop.de/index.php/cat/c231_Computer---PCs.html
- http://www.one.de
- http://www.elv-computer.de