Samsung N220

aus www.kruedewagen.de, Homepage von Ralf und Judith Krüdewagen (Kruedewagen)
Zur Navigation springen Zur Suche springen
Die druckbare Version wird nicht mehr unterstützt und kann Darstellungsfehler aufweisen. Bitte aktualisiere deine Browser-Lesezeichen und verwende stattdessen die Standard-Druckfunktion des Browsers.

Offizielle Infos und Support von Samsung

Für Backup und Restore des Windows-Krams:

Spezifikation

Testberichte und Infos

Foren und Wikis


Windows Auslieferungszustand

Partitionstabelle nach Einrichtung:

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x9d97ba08

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1        1959    15728640   27  Unknown
/dev/sda2   *        1959        1972      102400    7  HPFS/NTFS
/dev/sda3            1972        7193    41943040    7  HPFS/NTFS
/dev/sda4            7193       30402   186422272    f  W95 Ext'd (LBA)
/dev/sda5            7193       29829   181820416    7  HPFS/NTFS
/dev/sda6           29829       30401     4598464+  49  Unknown
  • sda1: Wiederherstellungspartition (Samsung Recovery Solution)
  • sda2: SYSTEM-Partition (daraus wird Windows gebootet)
  • sda3: C-Laufwerk
  • sda4: Extended
  • sda5: D-Laufwerk
  • sda6: - (nicht benutzt)

Firmware (nach Update): 08JI

Linux/openSUSE Unterstützung

Kernel-Modul mit N220-Support ggf. geplant, siehe samsung-laptop.ko

GMA 3150 Grafik:

  • unterstützt seit xf86-video-intel 2.10.0 release (Jan 2010)
  • enthalten ab openSUSE 11.3 (Milestone Releases), Xorg 7.5
  • kernel mode-setting (KMS) mandatory, ab Kernel 2.6.32

Probleme:

  • Handbuch nur im Flash-Format und zudem nur als exe-Datei
  • BIOS-Update nur als exe-Datei

Konfiguration unter openSUSE 11.3 Milestone 5

Die meisten Tipps und Vorschläge wurden übernommen von der Seite Samsung N150 auf archlinux.org.

Installation

Die Installation von openSUSE 11.3 Milestone 5 musste im Textmodus erfolgen mit dem Kernel-Bootparameter "acpi=off", da Maus und Tastatur in Yast im Grafikmodus nicht funktionierten. Nach der Installation trat dieses Problem nicht mehr auf.

Partitionierung

Für Windows 7 Starten wurde erstmal eine 40GB Partition behalten (sda1-sda3), um z.B. BIOS-Updates machen zu können. Der Rest wurde für Linux partitioniert, wobei eine normale Partition für /boot eingerichtet wurde und der Rest für Verwendung mittels LVM.

fdisk -l /dev/sda:

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9d97ba08

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1        1959    15728640   27  Unknown
/dev/sda2            1959        1972      102400    7  HPFS/NTFS
/dev/sda3            1972        7193    41943040    7  HPFS/NTFS
/dev/sda4   *        7194       30401   186418260    f  W95 Ext'd (LBA)
/dev/sda5            7194        7218      200781   83  Linux
/dev/sda6            7219       30401   186217416   8e  Linux LVM

cat /etc/fstab:

/dev/vgsystem/root   /                    ext4       acl,user_xattr        1 1
/dev/mapper/cr_data  /data                ext4       acl,user_xattr,nofail 0 0
/dev/vgsystem/swap   swap                 swap       defaults              0 0
/dev/disk/by-id/ata-SAMSUNG_HM250HI_S20TJ9BZ216055-part5 /boot                ext4       acl,user_xattr        1 2
proc                 /proc                proc       defaults              0 0
sysfs                /sys                 sysfs      noauto                0 0
debugfs              /sys/kernel/debug    debugfs    noauto                0 0
usbfs                /proc/bus/usb        usbfs      noauto                0 0
devpts               /dev/pts             devpts     mode=0620,gid=5       0 0

pvdisplay:

  --- Physical volume ---
  PV Name               /dev/sda6
  VG Name               vgsystem
  PV Size               177.59 GiB / not usable 968.00 KiB
  Allocatable           yes 
  PE Size               4.00 MiB
  Total PE              45463
  Free PE               2
  Allocated PE          45461
  PV UUID               acjsI7-OsNy-3NFW-816J-n53o-tBqp-DAZV0Q

vgdisplay

  --- Volume group ---
  VG Name               vgsystem
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  4
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                3
  Open LV               3
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               177.59 GiB
  PE Size               4.00 MiB
  Total PE              45463
  Alloc PE / Size       45461 / 177.58 GiB
  Free  PE / Size       2 / 8.00 MiB
  VG UUID               RZWnh9-r41m-dIpo-2d5z-bZoE-oOvu-fTnKIk

lvdisplay:

  --- Logical volume ---
  LV Name                /dev/vgsystem/data
  VG Name                vgsystem
  LV UUID                xMbY2e-m1rm-ej2h-raVC-Eoey-DDZB-eMDavx
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                143.58 GiB
  Current LE             36757
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:0
   
  --- Logical volume ---
  LV Name                /dev/vgsystem/root
  VG Name                vgsystem
  LV UUID                5wPLgI-oiLp-OsE8-NFsM-tZvl-kA1s-fCLqZg
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                30.00 GiB
  Current LE             7680
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:1
   
  --- Logical volume ---
  LV Name                /dev/vgsystem/swap
  VG Name                vgsystem
  LV UUID                Rge7xU-Ilzm-EOuV-ef8D-ONoO-M1Oi-SFLUHB
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                4.00 GiB
  Current LE             1024
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:2

Ethernet

Das 10/100 MBit/s Interface wird direkt erkannt. Kernel-Modul ist sky2.

Audio

Kein Problem, wird automatisch erkannt und unterstützt. Kernel-Module snd_hda_codec_realtek und snd_hda_intel.

Grafik und Display

Die Xorg Version 7.5 arbeitet sehr gut zusammen mit dem Grafik-Chip, ohne Erstellung einer /etc/X11/xorg.conf.

Umschaltung der Grafik-Ausgabe

Externes Display mit 1920x1080 ansteuern (was entgegen der Spec funktioniert):

xrandr --output VGA1 --mode 1920x1080

Internes Display ausschalten:

xrandr --output LVDS1 --off

Wieder das interne Display initialisieren/einschalten:

xrandr --output LVDS1 --mode 1024x600

Externes Display ausschalten:

xrandr --output VGA1 --off

Das Script kann genutzt werden und auf Fn-F4 gelegt werden, um das Display umzuschalten.

Helligkeit des interne Displays

Siehe Script archlinux.org. Das Script funktioniert auch auf dem N220.